Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper of the 2017 Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

If you want to find out how to remove the rear bumper of your first-generation Audi Q3 (2017) on your own and without the help of a professional, all you have to do is read the following guide and follow the procedure described. First of all, turn off the car and make sure it is parked on a flat surface.

Then go outside and remove the plastic pieces located on the wheel arches on both sides. At this point, use a wrench to unscrew all the screws holding the rear bumper in place, both in the lower area of the car and inside the trunk.

Finally, remove the bumper and you're done.


Posted on 30 January 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Bumper on an Audi Q3?
How to Replace the Rear Bumper on an Audi Q3?
Audi Q3 (2011-2018 / 8U) To replace the rear bumper on an Audi Q3, first detach the trim pieces located around the rear wheel wells. Once these are removed, you can loosen th…
How to remove the lower rear light of the Audi Q3
How to remove the lower rear light of the Audi Q3
Audi Q3 (2018-2025 / F3) In this video, we will see how to remove the rear taillight, integrated into the bumper, of the Audi Q3: using a plastic spatula, we open the panel l…
How to remove the front bumper of the Audi Q3.
How to remove the front bumper of the Audi Q3.
Audi Q3 (2011-2018 / 8U) In this guide, we will see the instructions that will allow us to disassemble and remove the front bumper of the Audi Q3. First, let's open the hood …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos