Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q3
    4. : Brake pads

Audi Q3 - Brake pads

Brake Pads Audi Q3 (2011-2018 / 8 u)

Audi Q3 (2011-2018 / 8U)
How to Replace the Brake Pads on the Audi Q3
Secure the Audi Q3 on jack stands, loosen the wheel bolts, and remove the front wheel. Work on the caliper by releasing the springs/clips, unscrewing the guide …Read all…
Posted on 20 June 2026 by ScegliAuto
Audi Q3 (2011-2018 / 8U)
How do you replace the rear brake pads of the Audi Q3?
To replace the rear brake pads of the Audi Q3, you need to lift the car with a jack or a lift, so that the front wheel is not in contact with the ground: this …Read all…
Posted on 27 January 2025 by ScegliAuto
Accelerator (1) Airbag (2) Roof rack bars (1) Battery (8) Transmission (1) Body (2) Key (20) Timing belt (9) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Throttle body (1) Differential (1) Electric cooling fan (1) Headlight (1) Tail light (5) Air filter (4) Cabin air filter (6) Oil filter (2) Accessory kit (1) Light bulb (2) Side marker bulb (1) Headlight bulb (3) Handle (3) Engine oil (1) Clock (2) Door trim panel (1) Front bumper (1) Rear bumper (2) Brake pads (2) Pump (2) Instrument cluster (3) Fuse box (29) Side mirror (2) AdBlue warning light (2) Warning light – error code (9) Tire pressure warning light (34) Service warning light (35) Fuel cap (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos