Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear brake pads of the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Brake pads

To replace the rear brake pads of the Audi Q3, you need to lift the car with a jack or a lift, so that the front wheel is not in contact with the ground: this way you can unscrew the nuts that secure the wheel to the hub, completely removing it and locating the caliper underneath. The caliper must be detached from the disc by unscrewing the screws that secure it and removing the pads inside; now you can insert the new pads, reattach the caliper to the disc and install the wheel.

Posted on 27 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on the Audi Q3
How to Replace the Brake Pads on the Audi Q3
Audi Q3 (2011-2018 / 8U) Secure the Audi Q3 on jack stands, loosen the wheel bolts, and remove the front wheel. Work on the caliper by releasing the springs/clips, unscrewing…
How to disassemble and replace the rear headlight of the Audi Q3
How to disassemble and replace the rear headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Below we will see the instructions that will allow us to disassemble and replace the rear taillight of the Audi Q3, in simple steps. First, we open t…
Where are the fuses located in the Audi Q3?
Where are the fuses located in the Audi Q3?
Audi Q3 (2018-2025 / F3) The fuses in the Audi Q3 are located inside the fuse boxes installed in the vehicle: this type of car has two fuse boxes. The first is found in the l…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos