Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Tt
    4. : Windshield wipers

Audi Tt - Windshield wipers

Windshield Wipers Audi Tt (1998-2006 / 8 n, mk 1)

Audi Tt (1998-2006 / 8N, MK 1)
How to Replace the Windshield Wiper Motor on an Audi TT?
To replace the windshield wiper motor on an Audi TT, first loosen the bolts securing the wiper arms and remove them. Next, you need to remove the gasket and …Read all…
Posted on 2 June 2026 by ScegliAuto
Airbag (2) Alternator (4) Shocks (1) Antenna (2) Car stereo (4) Roof rack bars (1) Battery (1) Air vents (1) Control arm (1) Transmission (2) Spark plugs (1) Convertible top (3) Body (3) Key (6) Onboard computer (1) Checks and maintenance (8) Throttle body (1) Dashboard (1) Headlight (4) Tail light (4) Air filter (1) Cabin air filter (1) Grille (3) Headlight bulb (5) Tail light bulb (5) Antifreeze coolant (1) Instrument panel light (1) (1) Exhaust muffler (2) Clock (2) Door trim panel (7) Front bumper (4) Rear bumper (2) Brake pads (3) Shift knob (1) Fuel pump (2) Push button (1) Power window switch (1) Instrument cluster (2) Fuse box (23) Axle shaft (1) Engine coolant temperature sensor (1) Door lock (1) Suspension system (2) Side mirror (5) Warning light – error code (5) (11) Tire pressure warning light (3) Service warning light (15) Fuel cap (5) Windshield wipers (1) Cylinder head (1) Oil vapor hose (1) Turbocharger (3) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos