Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Tt
    4. : Car stereo

Audi Tt - Car stereo

Audi Tt (2006-2014 / MK 2, 8J)
How to change the car radio in an Audi TT?
To change the car radio of the Audi TT, we need to get the appropriate keys designed for this purpose and sold in a set of 4. Once we have them, we can insert …read all…
Posted on 6 April 2023 by ScegliAuto
Audi Tt (1998-2006 / 8N, MK 1)
How do you remove the car radio from the Audi TT?
To be able to remove the car radio from the Audi TT you will need to use the special keys that are provided when you buy the car. These keys must be inserted …read all…
Posted on 29 October 2022 by ScegliAuto
Audi Tt (1998-2006 / 8N, MK 1)
Car radio disassembly instructions
Press in a central position on the aluminum cover of the car radio so that it opens and reveals the car radio itself; insert the special extraction keys (with …read all…
Posted on 26 July 2023 by ScegliAuto
Airbags (1) Alternator (3) Shock absorbers (1) Car stereo (3) Battery (1) Air Vents (1) Arm (1) Gearbox (2) Spark plugs (1) Bodywork (3) Key (2) -board computer (2) Checks and maintenance (14) Throttle body (1) Dashboard (1) Headlight (4) Tail light (4) Air filter (1) Grille (3) Headlight bulb (1) Rear light bulb (3) Antifreeze liquid (1) Dashboard light (1) Third brake light (1) Muffler (2) Door panel (3) Front bumper (3) Rear bumper (1) Brake pads (3) Tires (1) Fuel pump (2) Push button (1) Window lift button (1) Instrument cluster (4) Fuse box (11) Drive shaft (1) Coolant temperature sensor (1) Suspensions (2) Outside rearview mirror (3) Windscreen wipers (1) Engine head (1) Turbine (3) Steering wheel (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos