Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Tt
    4. : Alternator

Audi Tt - Alternator

Audi Tt (2006-2014 / MK 2, 8J)
Replacement of the alternator for the Audi TT 2.0 TFSI.
In this guide, we will see the main instructions useful for disassembling and replacing the alternator of the Audi TT 2.0 TFSI. First, we open the engine hood …read all…
Posted on 17 December 2023 by ScegliAuto
Audi Tt (1998-2006 / 8N, MK 1)
Alternator replacement instructions
The alternator is located in the front left part of the engine if you look at it from the front but to be able to disassemble it you need to create some room …read all…
Posted on 14 September 2023 by ScegliAuto
Audi Tt (1998-2006 / 8N, MK 1)
How to replace the car alternator
The alternator is one of the most important parts of a vehicle's electrical system. It must always be perfectly efficient, as its malfunction could create …read all…
Posted on 13 September 2023 by ScegliAuto
Airbags (1) Alternator (3) Shock absorbers (1) Car stereo (3) Battery (1) Air Vents (1) Arm (1) Gearbox (2) Spark plugs (1) Bodywork (3) Key (2) -board computer (2) Checks and maintenance (14) Throttle body (1) Dashboard (1) Headlight (4) Tail light (4) Air filter (1) Grille (3) Headlight bulb (1) Rear light bulb (3) Antifreeze liquid (1) Dashboard light (1) Third brake light (1) Muffler (2) Door panel (3) Front bumper (3) Rear bumper (1) Brake pads (3) Tires (1) Fuel pump (2) Push button (1) Window lift button (1) Instrument cluster (4) Fuse box (11) Drive shaft (1) Coolant temperature sensor (1) Suspensions (2) Outside rearview mirror (3) Windscreen wipers (1) Engine head (1) Turbine (3) Steering wheel (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos