Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Motor on an Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Windshield wipers

To replace the windshield wiper motor on an Audi TT, first loosen the bolts securing the wiper arms and remove them. Next, you need to remove the gasket and the grille located just below the windshield. Under the grille, which will be secured with clips, you will find the motor connected to tubes attached to the body. Loosen the bolts to pull out the motor and the tubes: at this point, you can disconnect the old motor from the tubes and replace it with a new one, which should be connected to the corresponding connector.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Audi TT 3
How to Replace the Key Battery of the Audi TT 3
Audi Tt (2014-2023 / MK 3, 8S) If you own a third-generation Audi TT and the car key has suddenly stopped working, don't worry because you can easily replace the battery by followi…
Replacing the License Plate Light on an Audi TT
Replacing the License Plate Light on an Audi TT
Audi Tt (2006-2014 / MK 2, 8J) Replacing the license plate light on an Audi TT? Let's see in this video how to replace the damaged bulb. Open the trunk hood, and using a screwdrive…
How to Remove the Radio from an Audi TT?
How to Remove the Radio from an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) To remove the radio from the Audi TT, use the special keys provided at the time of purchase. Insert these keys into the slots located under the side …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos