Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Audi TT.

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Door trim panel

Today we will discover the information and the procedure for disassembling and replacing the front door panel of the Audi TT. First, we open the front door of the car and start by removing the small cap located at the bottom of the handle; then we unscrew the screw found inside, as shown in the video. At this point, we unscrew the additional screws of the panel and pry on the sides to detach and remove it, disconnecting the cables located on the back; this way it will be possible to access the internal components of the door!

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove front door panel on Audi TT
How to remove front door panel on Audi TT
Audi Tt (2006-2014 / 8J, MK 2) Do we want to change the door cover panel? Let's see the disassembly of the panel of an Audi TT. We open the door and see the plastics to be removed.…
Disassembly of the front bumper grille of the Audi TT.
Disassembly of the front bumper grille of the Audi TT.
Audi Tt (2006-2014 / 8J, MK 2) Today's brief instructions will show us how to disassemble and replace the front bumper grille of the Audi TT, following these simple steps. First, w…
How do you remove the Audi TT door panel?
How do you remove the Audi TT door panel?
Audi Tt (2006-2014 / 8J, MK 2) To be able to remove the door panel from the Audi TT you have to pry with an object so that you can detach the cover which is located to the left of …

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos