Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Handle from an Audi A4 B9

Model: Audi A4 B9 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

Let's see how to remove the handle from an Audi A4 B9: first, remove the cover (the painted part), then detach the actual handle. Open the door and observe the end of the handle (the part that fits into the door edge), where there is a small rectangular cap. Pry it off with a flathead screwdriver.

You will find a T20 screw; keep the handle in the open position and detach the clips holding the painted cover. The technique is to push the handle forward while simultaneously pushing the cover panel backward.

Disconnect the electrical components, and now you can remove the handle: under the cover, you will see two screws that secure the handle to the door. Loosen them; they will not come out completely but will unscrew enough to free the handle.

Now the handle should come out of its housing.


Posted on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Outer Handle on an Audi A4?
How to Replace the Outer Handle on an Audi A4?
Audi A4 (2007-2016 / B8) To replace the outer handle on an Audi A4, open the corresponding door to access its side. Here, you will find the screw that secures the lock cylind…
How do you replace the outer handle of the Audi A4?
How do you replace the outer handle of the Audi A4?
Audi A4 (2007-2016 / B8) It will be possible to replace the external handle of the Audi A4 by opening the door, so that a tool can be inserted to leverage inside the hole loc…
How to Replace the Rear Hatch Handle on an Audi A4 B9
How to Replace the Rear Hatch Handle on an Audi A4 B9
Audi A4 (2014-2024 / B9) In this video, see how to remove and replace the external handle of the rear hatch on an Audi A4 B9 by following these simple steps. First, open the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos