Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear tailgate handle of the Audi A4 B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Handle

See other generations:
Video tutorial

In this video we see how to remove the rear hatch handle of the Audi A4 B7: first we need to remove the inner lining of the hatch, which is only pressure fitted, so we will easily remove it. We will have to access the two aluminum blocks from the inside, which have a 10mm nut on the sides, and both need to be removed in order to take off this aluminum cover.

We will also disconnect the power supply.

Before proceeding from the outside, it is advisable to remove the license plate, to avoid causing any damage, as the screws are very close. We remove the small screws we see on the outside and pull down the handle.


Posted on 9 March 2025 by ScegliAuto


Related tutorials

Disassembly of the rear tailgate panel of the Audi A4
Disassembly of the rear tailgate panel of the Audi A4
Audi A4 (2014-2024 / B9) In this short guide, we will see the instructions that will allow us to disassemble and remove the rear tailgate panel of the Audi A4. First, we open…
How to Remove the Inner Panel of the Trunk Lid on an Audi A4?
How to Remove the Inner Panel of the Trunk Lid on an Audi A4?
Audi A4 (2007-2016 / B8) To remove the inner panel of the trunk lid on an Audi A4, open the trunk itself to access the coverings of the lift supports that hold up the trunk. …
How to Replace the Rear Hatch Handle on an Audi A4 B9
How to Replace the Rear Hatch Handle on an Audi A4 B9
Audi A4 (2014-2024 / B9) In this video, see how to remove and replace the external handle of the rear hatch on an Audi A4 B9 by following these simple steps. First, open the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos