Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on an Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Service warning light

To reset the "Service" light on an Audi A4, start by turning on the instrument panel without starting the engine. Use the rotary control located on the central tunnel, part of the MMI (Multi Media Interface) system, to navigate the vehicle's settings menu. Turn the rotary control to highlight the "Car" or "Vehicle" option and press to select it. In the next menu, look for the section dedicated to maintenance or service intervals. Select this option and, using the rotary control, choose "Reset service interval" or a similar option. Follow the instructions that appear on the screen to confirm the reset. You may be required to turn or press the rotary control to complete the procedure. Once completed, turn off and on the instrument panel to verify that the "Service" light has been removed. Make sure that the oil change and other maintenance tasks have been performed before resetting. If the light persists, consult the vehicle manual or contact an authorized workshop.

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Audi A4
How to reset the service on the Audi A4
Audi A4 (2007-2016 / B8) To reset the service of the Audi A4 without turning on either the instrument panel or the car's engine, turn on the infotainment display on the centr…
How to reset the service light on the Audi A4
How to reset the service light on the Audi A4
Audi A4 (2007-2016 / B8) Performing the service light reset on an Audi A4 vehicle, model b8 produced from 2007 to 2016, is a simple and quick operation to be carried out inde…
How to reset the service in the Audi A4?
How to reset the service in the Audi A4?
Audi A4 (2007-2016 / B8) Resetting the service in the Audi A4, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have comp…

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos