Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on an Audi Q3?

Model: Audi Q3 F3 - Years 2018-2025
Part: Service warning light

To reset the "Service" light on an Audi Q3, start by turning on the instrument panel without starting the engine. Use the touchscreen of the onboard computer to navigate within the system. From the main screen, access the car settings menu, usually labeled as "Car" or "Vehicle". Once in the menu, look for the option related to maintenance or service intervals. Within this section, you will find the option to reset the maintenance indicator. Select this option and confirm your choice following the instructions that will appear on the screen. The system will guide you through the process and, once completed, the "Service" light will be reset and turn off. This reset is essential to keep the onboard system updated regarding future maintenance intervals. After performing the reset, make sure the light does not come back on and, if necessary, repeat the procedure.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Audi Q3?
How do you reset the Service light on the Audi Q3?
Audi Q3 (2011-2018 / 8U) In order to reset the Service light of the Audi Q3, you need to turn on the instrument panel by inserting the ignition key into the corresponding slo…
How to reset the service indicator on the 2017 Audi Q3
How to reset the service indicator on the 2017 Audi Q3
Audi Q3 (2011-2018 / 8U) If you are looking for a guide to help you carry out the manual reset of the service light of your Audi Q3 (2017), then all you have to do is careful…
How do you reset the Service light on the Audi Q3?
How do you reset the Service light on the Audi Q3?
Audi Q3 (2018-2025 / F3) It will be possible to make the Service indicator on the instrument panel of the Audi Q3 disappear by inserting the ignition key into the ignition sw…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos