Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Audi A6 C6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

In this video, we will see how to remove the rear bumper of an Audi A6 C6: first, we need to remove the screws in the two rear wheel arches, then we will remove the plastic cover that covers the rear part, which is also fixed by screws. We will need to open the trunk and remove the screws inside, removing the cover of the trunk itself.

This will allow us to remove the protection cover of the tailgate. Then we will need to go inside again and remove the sealing bolts and electrical connectors from this side; we can then start levering from the sides to remove the clips, delicately as it is a single piece of considerable size, and finally remove it from its housing.


Posted on 27 March 2025 by ScegliAuto


Related tutorials

Remove the Rear Bumper of an Audi A6
Remove the Rear Bumper of an Audi A6
Audi A6 (2004-2012 / C6, MK 3) Is the bumper irreparably damaged and cannot be repaired? Let's see how to remove it from our Audi A6. Open the trunk; remove the covering cloth on t…
How do you remove the rear bumper to install the original PDC sensors in an Audi A6 C6?
How do you remove the rear bumper to install the original PDC sensors in an Audi A6 C6?
Audi A6 (2004-2012 / C6, MK 3) To remove the rear bumper of an Audi A6 C6, first lift the car using a jack for safety and place a support. Start by unscrewing the screws on the sid…
How to Remove the Front Bumper of the Audi A6?
How to Remove the Front Bumper of the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) To remove the front bumper of the Audi A6, open the hood to detach the black cover located at the top of the bumper, just above the grille. Once this…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos