Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and remove the original car stereo on Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Car stereo

How to disassemble and remove the original car stereo on Audi A3? Let's see with this video how to perform the disassembly: we turn off the car radio, then we use the original or aftermarket metal keys to disassemble the car stereo. We insert the keys in the slots placed on the plastic covering of the stereo; we pull the stereo towards us as in the video (after the key lock click) and remove the car radio, paying attention to the various wiring of the same (disconnect the power supply terminals and the antenna cable). We reassemble the original car radio or one of a generic brand with a special adapter.

Posted on 11 August 2019 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the original car stereo on an Audi A3
How to disassemble the original car stereo on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) How to disassemble the original car stereo on an Audi A3? Let's see how to perform the replacement following the guide. We use the original metal sti…
Remove Audi A3 radio
Remove Audi A3 radio
Audi A3 (2003-2013 / 8P, MK 2) Let's see how to disassemble the car radio of an Audi A3. We use the original or aftermarket metal dongles to disassemble the car radio. We insert th…
Remove Audi A3 radio
Remove Audi A3 radio
Audi A3 (2003-2013 / 8P, MK 2) We replace the car radio on an Audi A3 if it is damaged, let's see how to do it. We use the original metal keys to disassemble the car stereo. Insert…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos