Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to install an additional horn on a Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Accessory Kit
Operation: How to install an additional horn on a Fiat Punto

It may happen that the original horn begins to generate a decidedly subdued sound: at this point you can decide to install a pair of horns connected in parallel with the original one so that the final sound is more decisive; the installation is very easy to do but it is important to direct the sound output towards an air intake, for this reason a support bracket must be shaped in order to fix it to the bonnet crossbar with a single pin; after fixing, take the power supply positive from the fuse box with a 2.5 mm section cable, intercepting the purple wire directly from under the relay while the earth directly from the negative pole of the battery.


Posted on 29 September 2023 by ScegliAuto



How to replace the Fiat Punto horn
Fiat Punto (1999-2011 / 188, MK 2) In this short and simple guide, we will see the steps that will allow us to disassemble and replace the Fiat Punto's horn, following the instructions
How to replace the horn of the Fiat Punto.
Fiat Punto (1999-2011 / 188, MK 2) Below we will see the instructions that will allow us to disassemble and replace the horn or acoustic warning of the Fiat Punto, in simple steps. Fir
Disassembly of the horn / horn Fiat Grande Punto
Fiat Punto (1999-2011 / 188, MK 2) In today's video tutorial we will see how to remove the horn of a Fiat Grande Punto. First we open and lift the bonnet and we go to remove the grille

    Frequently Asked Questions

    • Punto 2005-2018 - How to remove the stickers on the uprights of the Punto Evo? Read Answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto crik located? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos