Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Headlight

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Guide to Replacing the Front Headlamp Bulb on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you how to remove and replace the front headlamp bulb on the Fiat Bravo; this operation is done with the headlamp removed. First…
How to Replace the Front Headlamp Bulb on the Fiat Bravo?
How to Replace the Front Headlamp Bulb on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To replace the front headlamp bulb on the Fiat Bravo, open the bonnet to access the components inside the engine bay. Locate the protective circular …
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
How to Replace the Front Headlamp Bulbs on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Let’s see how to replace the front headlamp bulbs fitted on a Fiat Bravo. Open the front bonnet by pulling the lever located at the bottom right of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Bravo 2007-2014 - Why do the front headlights of the Fiat Bravo no longer work? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos