Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Blower motor

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Updated on 25 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mercedes Classe A (2004-2012 / W169) These brief instructions will show you how to remove and replace the cabin fan resistor on the Mercedes A-Class. First, get inside the vehicle on the…
Mercedes Classe A (2004-2012 / W169) Let's discover the information that will allow us to disassemble and replace the cabin fan resistor of the Mercedes Class A. First, we open the front…
Mercedes Classe A (2004-2012 / W169) .. replace the cabin fan resistor in a Mercedes A-Class W169 produced from 2004 to 2012. To start, remove the plastic panel located on the passenger side.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos