Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan Resistor on the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

These brief instructions will show you how to remove and replace the cabin fan resistor on the Mercedes A-Class. First, get inside the vehicle on the front passenger side and start by removing the plastic cover located under the glove compartment, which gives you access to the cabin fan resistor.

Disconnect the electrical connector to detach the resistor from the cabin fan, as shown in the video. At this point, install and connect the new cabin fan resistor, testing the fan at various speeds.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Replacement of the cabin fan resistor of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the cabin fan resistor of the Mercedes Class A. First, we open the front passenger door and start removing the plastic cover found at the bottom,.. …
How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy…
How to Replace the Fan Resistor in a Mercedes A-Class
How to Replace the Fan Resistor in a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. can start, enter the cabin of your Mercedes A-Class. Using a Torx screwdriver, begin by unscrewing and removing the screws that secure the lower cover.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos