Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan resistor of the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
This video is currently unavailable

Let's discover the information that will allow us to disassemble and replace the cabin fan resistor of the Mercedes Class A. First, we open the front passenger door and start removing the plastic cover found at the bottom, under the glove compartment; inside we will find the cabin fan, where we will disconnect the electrical connector of its resistor to remove it, as shown in the video.

Once the new cabin fan resistor is installed, we will check its proper functioning; finally, we reassemble the plastic partition!


Posted on 25 June 2025 by ScegliAuto


Related tutorials

Removing the Cabin Fan Resistor on the Mercedes A-Class
Removing the Cabin Fan Resistor on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the cabin fan resistor on the Mercedes A-Class. First, get inside the vehicle on the front passenger side and start by removing the plastic cover.. …
How to Replace the Cabin Fan Resistor in a Mercedes A-Class
How to Replace the Cabin Fan Resistor in a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replace the cabin fan resistor in a Mercedes A-Class W169 produced from 2004 to 2012. To start, remove the plastic panel located on the passenger side.. …
How to Replace the Cabin Fan Resistor on a Mercedes-Benz A-Class?
How to Replace the Cabin Fan Resistor on a Mercedes-Benz A-Class?
Mercedes Classe A (2004-2012 / W169) .. the cabin fan resistor on a Mercedes-Benz A-Class, remove the plastic panel located under the glove compartment on the passenger side. To remove.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos