Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the service light of the Audi A3.

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

The steps outlined in this guide will show us how to reset the maintenance reminder (service) on the Audi A3. First, we get into the car and turn on the instrument panel; then we press the right button on the instrument panel until the oil and service warning appears, as shown in the video. At this point, we press and hold the right button until the mileage before the next service is reset, consequently resetting the maintenance reminder light!

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the 2020 Audi A3
How to reset the tire pressure sensor on the 2020 Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) If you own a 2020 Audi A3 and want to learn how to manually reset the tire pressure indicator, simply follow the instructions below carefully and ste…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) The service light reset, related to the car service on the latest generation Audi A3 vehicle, must be done using a scanner and OBD2 port. We then con…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) The reset of the service light or maintenance light is a necessary operation after performing car maintenance operations, which usually include the r…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos