Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the condensation that has formed inside the front headlight

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Today we will explain how to naturally eliminate the condensation that has formed inside the front headlight of the car. To show you how to carry out this simple operation, we will use the Audi A6. To remove the condensation, we need to use a simple hair dryer.

Keeping the hair dryer at a certain distance, position it in front of the headlight and let the hot air escape, being careful not to overheat the plastic.

By taking short breaks, you will see how the water will begin to dry up and the condensation will be removed. The main causes of condensation formation are due to water infiltration inside the headlight, so the owner should replace the gasket.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

Maintenance of Your Car's Headlight
Maintenance of Your Car's Headlight
Audi A6 (1997-2004 / MK 2, C5) The headlights of your car are very important for safe driving, so it is crucial that they are always in perfect condition. This guide shows how to r…
Replacing the Front Headlight of the Audi A6
Replacing the Front Headlight of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today, let's go through the guide to remove and replace the front headlight assembly of the Audi A6. First, open the hood and start by removing the f…
How to Remove the Front Headlight of an Audi A6?
How to Remove the Front Headlight of an Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To remove the front headlight of the Audi A6, open the hood to access the engine compartment and remove the plastic cover located at the rear of the …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos