Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to remove the intake manifold of an Audi A3

Audi A3 - Video tutorial

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Engine
Operation: How to remove the intake manifold of an Audi A3

Let's see how to remove the intake manifold of the engine of an Audi A3. To begin: we disassemble the plastic soundproofing panel on the engine head and remove the oil rod, we disassemble the ventilation box and all its components (with socket wrench). We disconnect with needle nose pliers all the terminals that bring electricity to the motor. Remove the various wiring present on the head (disconnect the metal clamps of the various pipes and the various power supply terminals with pliers). With a socket wrench or electric screwdriver we unscrew all the tightening pins of the intake manifold; let's remove it away from the engine compartment. Let's reassemble everything by proceeding backwards.


Posted on 15 November 2023 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What is the cost of changing the engine on the Audi A3? Read Answer
    • A3 2012-2019 - What problems can the Audi A3 heat exchanger have? Read Answer
    • A3 2020-2027 - Where is the engine speed sensor located on the Audi A3? Read Answer
    • A3 2012-2019 - When does the engine light come on in the Audi A3? Read Answer
    • A3 2003-2013 - What does the engine light indicate on the Audi A3? Read Answer
    • A3 2003-2013 - How much does it cost to change the Audi A3's hydraulic lifters? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos