Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Electromechanical Steering Rack on an Audi A3 8P 1.9 TDI

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the electromechanical steering rack on an Audi A3 8P 1.9 TDI. First, remove the battery from your car by disconnecting the two terminals, then proceed to remove the steering column; to do this, remove the plastic screws under the pedal area and detach the column.

Next, lift the vehicle and remove the steering ends; remove the lower engine cover.

Finally, remove the fixing bolts of the electromechanical steering rack and disconnect the electrical connector, following the video until the end!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Today, you will see the instructions on how to remove the turbocharger from an Audi A3 1.9 TDI. First, open the bonnet and remove the intake hose, al…
Audi A3 (2003-2013 / 8P, MK 2) Briefly follow these instructions to remove and replace the starter motor on the Audi A3 2.0 TDI. First, open the bonnet of your car and begin by rem…
Audi A3 (2003-2013 / 8P, MK 2) In this tutorial, you will see how to remove the master cylinder or clutch pump on the Audi A3 8P 1.9 TDI, as well as on the Volkswagen Golf 5. First…

How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass

Follow these brief instructions to activate the automatic folding and unfolding of the external wing mirrors on the Jeep Compass. First, get inside the vehicle and turn on the ignition; then press the button located beneath the mirror glass adjustment to electrically open the mirror, as shown in the video. Pressing the button in the opposite direction will close the mirrors; by holding the button, the mirrors will open and close automatically!

Watch the video!


by ScegliAuto

More videos