Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Replacing the starter motor of the Audi A3 2.0 TDI

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Starter motor
Operation: Replacing the starter motor of the Audi A3 2.0 TDI

Let's briefly see the instructions that will allow us to disassemble and replace the starter motor of the Audi A3 2.0 TDI. First of all, we open the bonnet of our car and start disassembling and removing the intake duct, disconnecting the electrical connector and unscrewing the air filter box screw; then we will find the starter motor underneath, as shown in the video. At this point we disconnect the terminals of our battery and then disconnect the starter motor wiring; then we unscrew the fixing pins to remove it and replace it with the new one!


Posted on 9 December 2022 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - Where is the starter motor of the Audi A3 located? Read Answer
    • A3 2012-2019 - Why doesn't the Audi A3 start? Read Answer
    • A3 2012-2019 - How much does it cost to replace the starter motor on the Audi A3? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos