Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Starter motor

Today in this guide we will see the procedure for disassembling and replacing the starter motor of the Audi A3, in simple steps. First, we open the engine hood of the car and start disassembling and removing the intake hose and the air filter box; then we disconnect both battery terminals, as shown in the video. Underneath, we find the starter motor, so we disconnect the wiring and unscrew the fixing screws to remove it and replace it with the new original one; finally, we reassemble the air filter box!

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Audi A3?
How to Replace the Starter Motor on the Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) To replace the starter motor on the Audi A3, open the bonnet to access the components inside the engine bay. You will need to unscrew the bolts secur…
Replacing the Starter Motor on the Audi A3 2.0 TDI
Replacing the Starter Motor on the Audi A3 2.0 TDI
Audi A3 (2003-2013 / MK 2, 8P) Briefly follow these instructions to remove and replace the starter motor on the Audi A3 2.0 TDI. First, open the bonnet of your car and begin by rem…
How to Replace the Starter Motor on an Audi A3
How to Replace the Starter Motor on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Lift the bonnet and remove a terminal from the battery to protect other components. Next, disconnect the connector linked to the air intake and remov…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos