Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to replace the starter motor on the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Starter motor
Operation: How to replace the starter motor on the Audi A3

After lifting the bonnet, go and remove a clamp from the battery to protect the other instruments, now it will be necessary to disconnect the connector connected to the air inlet and remove all the air filter block and relative pipes, the starter motor is located underneath. of it, then start removing all the connectors and cables connected and unscrew the bolts that lock it for convenience it will be convenient for you to work the bolts from the bottom of the car, now you can extract the motor from the top of the hood, take the new motor and reassemble everything following the steps backwards.


Posted on 20 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • A3 2012-2019 - Where is the starter motor of the Audi A3 located? Read Answer
    • A3 2012-2019 - Why doesn't the Audi A3 start? Read Answer
    • A3 2012-2019 - How much does it cost to replace the starter motor on the Audi A3? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos