Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2012 Audi A3?

Model: Audi A3 - Years 2003-2013
Part: Service warning light

To reset the maintenance light on a 2012 Audi A3, the procedure depends on the type of service. The manual reset from the dashboard works only for the engine oil: turn on the ignition, press the right button on the instrument cluster until "Service" appears, then hold it for about 5 seconds until the display shows the new interval. This resets the oil counter, but does not remove the service wrench light. To eliminate that, a diagnostic tool (VCDS, OBDeleven or similar) is required, connected to the OBD port. The procedure involves entering module 17 (Instrument Cluster), selecting Adaptation, and setting the maintenance channels to 0. Without a diagnostic tool, the only alternative is to go to a qualified workshop.

Posted on 4 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on an Audi A3?
How to reset the "Service" indicator on an Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) To reset the "Service" light on an Audi A3, turn on the instrument panel without starting the engine. Access the onboard computer through the central…
Reset Service Light on Audi A3
Reset Service Light on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Want to reset the oil warning light on an Audi A3? Follow these steps to clear the warning light. Turn on the ignition (you will see the maintenance …
How to Reset the Service Light on an Audi A3 MK4
How to Reset the Service Light on an Audi A3 MK4
Audi A3 (2020-2026 / 8Y, MK 4) Here we see how to reset the service light on an Audi A3 MK4 that uses the MIB3 multimedia system with a touchscreen. Turn on the instrument panel an…

Other guides you may be interested in

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos