Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light on Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Tail light

Replacing a damaged headlight on an Audi A3? How to do? Let's take apart the broken headlight and put on a new one. We lift the bonnet of the luggage compartment, unscrew the tightening screws placed on the side of the covering plastic with a screwdriver. We detach the rear light from its housing once removed, we disconnect the power supply terminals. We replace the bulbs if they are damaged with new ones (same size and voltage). Mount the lighthouse with attached screws and reconnect the power supply terminals. We press and screw the rear light. We close the hatch. We test the correct functioning of the lights.

Posted on 23 May 2020 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the rear light and replacing the Audi A3 bulb
Removing the rear light and replacing the Audi A3 bulb
Audi A3 (2003-2013 / 8P, MK 2) Let's see in this video how to remove the rear light and how to replace the bulbs on an Audi A3 second series. First of all we open the tailgate of t…
How to replace the fog light bulb of an Audi A3 8V
How to replace the fog light bulb of an Audi A3 8V
Audi A3 (2012-2019 / MK 3, 8V) How to change the fog light bulb of the Audi A3 version 8V? It is much simpler than it may seem: in fact, to remove the plastic cover that covers the…
How to remove the rear light of the Audi A3.
How to remove the rear light of the Audi A3.
Audi A3 (2012-2019 / MK 3, 8V) The steps to remove the rear light of an Audi A3 8V model vehicle are as follows: - open the trunk; - remove the side cover; - unscrew the two Torx s…

How to Remove the Front Headlamp on a Renault Megane

Let's see how to remove the front headlamp on a Renault Megane. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Unscrew the headlamp securing bolts with a screwdriver, along with the associated clips, and extract the headlamp from its housing. Once the headlamp is removed (located at the rear of the headlamp), take it out, and you will find the bulbs with metal clips. Pull out the bulb holder from the headlamp and extract the damaged bulb using a screwdriver. Install the new bulb (always ensure it is the correct type and size) and insert the bulb holder back into the headlamp housing.

Watch the video!


by ScegliAuto

More videos