Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb of an Audi A3 8V

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Fog lights

How to change the fog light bulb of the Audi A3 version 8V? It is much simpler than it may seem: in fact, to remove the plastic cover that covers the headlight there are no screws to remove. It will be enough to lever with a plastic spatula in order to remove the clips, also made of plastic, that hold the component fixed to the bodywork. Once this protection is removed, we will need a Philips screwdriver to remove the two screws that hold the headlight fixed to the bodywork. Pull it out of its housing and remove the electrical connector plug. Turn the back of the lamp counterclockwise and remove it from the headlight to change it.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the dipped beam bulb on an Audi A3
How to replace the dipped beam bulb on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today, we will discover the main guide on how to dismantle and replace the front headlamp bulb on an Audi A3. First, open the bonnet of your car and …
How to Replace the Bulb in an Audi A3 Wing Mirror
How to Replace the Bulb in an Audi A3 Wing Mirror
Audi A3 (2012-2019 / 8V, MK 3) Let’s see how to replace the bulb located in the external rear-view mirror of an Audi A3. Using a screwdriver or a plastic lever, remove the number p…
How to replace the side turn signal bulb of the Audi A3
How to replace the side turn signal bulb of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Replacing the turn signal light bulb of the right and left side of the Audi A3 model 8V is an easy and quick operation to perform independently. To r…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos