Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the head restraints on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Seat

If you have not been able to figure out how to remove the head restraints of the front seats of your Audi, we are here to come to your rescue. The operation is much simpler than it seems, however, it is not completely intuitive, while on most cars the button to release the headrest rods is clearly visible here it is hidden. Enter the car from the rear seats, follow the direction of the headrest rods with your fingers and about 3 cm lower, making a slight pressure, you will find the button under the upholstery, press it with one hand while you can remove it with the other.

Posted on 23 June 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headrests of the Audi A4
How to remove the headrests of the Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to remove the headrests of the front seats of a 2016 Audi A4 model b9. To begin the removal, insert a flat-tipped screwdriv…
How to remove the headrests and rear seats of the Audi A4
How to remove the headrests and rear seats of the Audi A4
Audi A4 (2004-2008 / B7) Today we will explain how to remove the headrests and rear seats of the Audi A4. This operation is valid for the b6 and b7 models and can be fully ca…
How to remove the headrests of the Audi A4
How to remove the headrests of the Audi A4
Audi A4 (2007-2016 / B8) With the help of the following video tutorial, we will illustrate the steps to remove the headrests of the front seats of the Audi A4 car. Unlike the…

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos