Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the backrest of the Audi A4 seats

Model: Audi A4 B8 - Years 2007-2016
Part: Seat

Today we will explain how to remove the backrest of the seat of an Audi A4 B8 model car. To perform this operation, we will need to use a Phillips screwdriver and a plastic removal tool. Unscrew the side screws on the backrest. Insert the plastic tool inside the plate on the back of the seat in order to remove it without damaging the bodywork. After removing the plate, it is possible to perform internal maintenance operations, such as replacing wiring related to electronic functions. The assembly follows the reverse procedure.

Posted on 26 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headrests on an Audi A4
How to Remove the Front Headrests on an Audi A4
Audi A4 (2007-2016 / B8) To remove the front seat headrests, position yourself behind the front seat backrest, accessing the rear passenger seat; then grasp the headrest and …
How to remove the headrests and rear seats of the Audi A4
How to remove the headrests and rear seats of the Audi A4
Audi A4 (2004-2008 / B7) Today we will explain how to remove the headrests and rear seats of the Audi A4. This operation is valid for the b6 and b7 models and can be fully ca…
How to Remove the Front Seat of the Audi A4 B5
How to Remove the Front Seat of the Audi A4 B5
Audi A4 (1994-2000 / B5) This guide shows how to remove the front seats of the Audi A4 B5. After pulling the seat forward, from the passenger side, remove the screw at the en…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos