Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Control Knob Bulbs in a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument panel light

Video tutorial

How to replace the bulbs for the air conditioning control knobs in a Peugeot 207? In this video, see how to proceed. Remove the side trim plastics using a plastic lever; disconnect the locking levers of the air conditioning controls with a screwdriver (levering them out), then remove the parts from the instrument panel (as shown in the video).

Be careful not to break the plastic tabs that secure the frames. After removing the knobs from the panel, replace the bulbs or LEDs with new ones (remove the onboard computer if replacing the LEDs). Finally, reassemble all the parts in reverse order.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Change the Illumination Bulbs for the Air Conditioning Controls on a Peugeot 207
How to Change the Illumination Bulbs for the Air Conditioning Controls on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to change the illumination bulbs for the air conditioning knobs on a Peugeot 207? Follow these steps. Remove the air conditioning knobs by hand. …
How to Remove the Air Conditioning Controls from the Peugeot 207
How to Remove the Air Conditioning Controls from the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) This guide will show you how to remove the air conditioning controls and replace the bulbs in the Peugeot 207. First, get in the vehicle and start by…
Removing the Air Conditioning Controls of the Peugeot 207
Removing the Air Conditioning Controls of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will see the main instructions to remove and replace the air conditioning controls or their bulbs of the Peugeot 207. Fir…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos