Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to change the ventilation lighting bulbs on a Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Light bulb
Operation: How to change the ventilation lighting bulbs on a Peugeot 207

How do you change the lighting bulbs of the manual air conditioning knobs on a Peugeot 207? Let's see how to proceed in this video. We remove the ventilation knobs with our hands. We disconnect the bezels of the air conditioning controls with a screwdriver (by levering), then, we extract the parts from the instrument panel. We are careful not to break the plastic tabs that block the frames. After removing the knobs from the dashboard, we replace the light bulbs or LEDs of the lighting with new ones (as in the video). Finally we reassemble all the pieces by proceeding backwards in the operations.


Posted on 24 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 207 2006-2015 - How much does it cost to replace the bulb of a rear headlight of a Peugeot 207? Read Answer
    • 207 2006-2015 - How much do the bulbs for the taillights on the Peugeot 207 cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos