Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How to remove the license plate light bulb of the Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: License plate light
Operation: How to remove the license plate light bulb of the Peugeot 207

Replacing the license plate light bulb on the Peugeot 207 is a simple and quick operation, which can be done independently thanks to our short video tutorial. To start the replacement of the license plate light bulb, we need to open the trunk and use a flat-head screwdriver to remove the upper cover of the bulb. We continue the replacement by removing the bulb, disconnecting it from its connector. To finish, we insert the new bulb, connect it to the connector, and then close the cover. Once the trunk is closed, we test the operation of the new bulb.


Posted on 28 February 2024 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos