Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulbs on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: License plate light

This video is currently unavailable

In this video, we will see how to replace the damaged number plate bulbs on a Peugeot 207. Using a screwdriver, remove the transparent light unit located in the rear hatch of the car. Once the plastic cover is removed, extract the bulb holder by hand, then disconnect the bulb from it. Install the new/LED bulb (same size and voltage) into the bulb holder, then reassemble the light unit into the hatch panel, pressing until the clips lock automatically.

Finally, test the correct operation of the previously installed bulb.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Number Plate Bulb from the Peugeot 207
How to Remove the Number Plate Bulb from the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the number plate bulb on the Peugeot 207 is a simple and quick operation that can be done independently, also thanks to our short video tut…
Replacing the Rear Headlamp Bulbs on Peugeot 207
Replacing the Rear Headlamp Bulbs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replace the damaged bulbs inside the rear headlamp of your Peugeot 207. Open the boot and remove the side trim panel. Locate the screws securing the …
Replacing the Front Headlamp Bulbs on a Peugeot 207
Replacing the Front Headlamp Bulbs on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the front headlamp bulbs on a Peugeot 207. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos