Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 207
  6. : Removal of the Peugeot 207 air conditioning controls

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Air conditioning controls
Operation: Removal of the Peugeot 207 air conditioning controls

In this video tutorial we will see the main instructions for disassembling and replacing the air conditioning controls or its bulbs of the Peugeot 207. First of all, we get on board the car and begin to remove the two lateral plastic parts of the central instrumentation, levering the sides; then unscrew the screws to remove all the controls, disconnecting the electrical connectors on the back, as shown in the video. At this point we are going to remove and replace, if necessary, the air conditioning control bulbs; finally we reassemble everything, applying the reverse procedure!


Posted on 28 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos