Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : Replacement of air conditioning lights on Peugeot 207

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Dashboard
Operation: Replacement of air conditioning lights on Peugeot 207

First of all, with the help of a plastic lever, remove the two long vertical plastics on the sides of the car radio (they are only stuck together). Then unscrew the two lower lateral screws, relating to the lower controls, thus being able to move all the plate associated with them. To open the air conditioner control flap, you must lever, again with a wedge or a small flat screwdriver, on the hooks located behind and on the side of the flap itself. Once extracted from the seat, you can see and remove the bulbs by replacing them with the new ones you have purchased.


Posted on 1 January 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 207 2006-2015 - How do I change the time of the Peugeot 207? Read Answer
    • 207 2006-2015 - What are the main warning lights of the Peugeot 207? Read Answer
    • 207 2006-2015 - Where can you find the explanations of the warning lights on the Peugeot 207? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos