Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel on the Audi Q5

Model: Audi Q5 8R, MK 1 - Years 2008-2017
Part: Door trim panel

We remove the door cover panel of a Q5. We disconnect the battery terminals in the engine compartment, remove the plastic above the panel (as in the video) with a screwdriver, unscrew the screws inside it (unscrew all the screws). door opening and the screws in the handle (after removing the plastic screw cover caps). Unscrew the screws in the lower part of the door panel, detach the clamping clips of the same. Remove the panel and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door or replace the panel.

Posted on 30 July 2020 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Audi Q5
How to disassemble the front door panel of the Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Today we will discover the process of disassembling and replacing the front door panel of the Audi Q5. First, we open the door panel and start removi…
Disassembly of the front door panel of the Audi Q5
Disassembly of the front door panel of the Audi Q5
Audi Q5 (2008-2017 / 8R, MK 1) These short and simple steps will show us the process of disassembling the front door panel of the Audi Q5. First, we open the front door of the vehi…
Replacing the rear door lock on the Audi Q5 MK1
Replacing the rear door lock on the Audi Q5 MK1
Audi Q5 (2008-2017 / 8R, MK 1) In this video tutorial we will see how to remove and replace the rear door lock actuator on the Audi Q5 first series, following the instructions belo…

Other guides you may be interested in

Replace Remote Key Battery on BMW X1

Is the remote key battery dead? Let's see how to change it. Take the remote and slide the button to release the metal key. Once extracted, use a screwdriver to pry between the key cover and the plastic cap. Pry until the two pieces separate from the cover, remove the battery holder, replace the worn battery with a new one of the same size and voltage. Reassemble the cover and insert the metal key back into the remote. Check the remote's functionality with the buttons.

Watch the video!


by ScegliAuto

More videos