Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A1 headlight bulb replacement

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Headlight bulb

In this video tutorial we will see how to remove and replace the headlight bulb of an Audi A1. First we open the engine hood of the car from the inside and remove the headlight support screws that we find on the edges of it; then we disconnect the electrical connector and extract the whole light. At this point we are going to unscrew the screws of the protection cap of the bulbs and disconnect the connector attachment: then extract the old bulb and replace it with the new one, as shown in the video. Now let's go and reassemble everything, applying the reverse procedure!

Posted on 6 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Audi A1
How to replace the headlight bulb of the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) If you want to replace the bulb of one of the two front headlights of your first series Audi A1 by yourself, just read the following guide and follow…
How to replace the front headlight bulb of the Audi A1
How to replace the front headlight bulb of the Audi A1
Audi A1 (2010-2018 / MK 1, 8X) In this new guide we will discover the steps you need to take if you want to independently replace the headlight bulb of your Audi A1 first series. F…
How to replace the headlight bulb on the Audi A1?
How to replace the headlight bulb on the Audi A1?
Audi A1 (2010-2018 / MK 1, 8X) In order to replace the headlight bulb of the Audi A1 you have to open the hood so that you can unscrew the bolts that secure it inside its housing. …

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos