Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb of the Audi A1

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Headlight bulb

To replace the headlamp bulb of the Audi A1, open the bonnet to access the bolts that secure it in its housing. Once these bolts are removed, disconnect the connector at the back of the headlamp so that it can be completely removed. This will allow you to remove the cover at the back to take out the bulb and replace it with a new spare part; after replacement, reassemble all the removed components.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Audi A1?
How do you replace the headlight bulb of the Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) In order to replace the headlight bulb of the Audi A1, you need to open the hood so that you can access the components in the top of the engine compa…
How to replace the front headlight bulb of the Audi A1
How to replace the front headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In this new guide we will discover the steps you need to take if you want to independently replace the headlight bulb of your Audi A1 first series. F…
How to replace the headlight bulb of the Audi A1
How to replace the headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) If you want to replace the bulb of one of the two front headlights of your first series Audi A1 by yourself, just read the following guide and follow…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos