Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on the Audi A1

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this new guide, discover the steps you need to follow to independently replace the front headlight bulb on your first-generation Audi A1. First, ensure you have a new compatible bulb ready, then lift the bonnet and, using a cross-head screwdriver, unscrew the screws located near the headlight.

Next, pull the headlight towards you and disconnect the electrical connector.

Finally, remove the protective cap and proceed with the bulb replacement.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on an Audi A1
How to Replace the Front Headlight Bulb on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Replacing the front headlight bulb on an Audi A1 is very simple. This operation can be done independently, aided by our video tutorial. The first ste…
How to replace the headlight bulb of the Audi A1
How to replace the headlight bulb of the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) If you want to replace the bulb of one of the two front headlights of your first series Audi A1 by yourself, just read the following guide and follow…
Replacing Front Headlight Bulb in Audi A1
Replacing Front Headlight Bulb in Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In this video tutorial, you will learn how to remove and replace the front headlight bulb in an Audi A1. First, open the engine bonnet from inside th…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos