Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight from an Audi A1

Model: Audi A1 MK 2, GB - Years 2018-2025
Part: Headlight

Here's how to remove the front headlight from an Audi A1: this operation requires some skill. Start by opening the bonnet, disconnect the two electrical connections at the back of the headlight by first pushing the plug inwards, pressing the locking point, and then separating the connector. The headlight is secured with three screws of different sizes, which must be unscrewed with more turns than shown in the video, where they had already been loosened to speed up the process. Once done, carefully grasp the headlight and pull it outwards, taking care not to scratch the edges of the bodywork.

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight from an Audi A1
How to Remove the Front Headlight from an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Removing the front headlight from an Audi A1 is a simple and quick task you can do yourself when you need to replace the bulb or make modifications t…
Replacing the Rear Light Bulbs on an Audi A1
Replacing the Rear Light Bulbs on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Today, you will discover the main steps to remove and replace the rear light bulbs on an Audi A1. First, open the rear hatch of the boot and start by…
Replacing Front Headlight Bulb on Audi A1
Replacing Front Headlight Bulb on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In this video tutorial, you will learn how to remove the front headlight and replace its bulbs on an Audi A1. First, open the bonnet from inside the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos