Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on an Audi A1

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Today, you will discover the main steps to remove and replace the rear light bulbs on an Audi A1. First, open the rear hatch of the boot and start by removing the plastic cover behind the light; unscrew the fixing screws of the light to remove it, disconnecting the electrical connector of the bulbs.

At this point, remove the faulty bulbs from the holder, replacing them with new ones (of the correct type and with the same fitting); reassemble the rear light and check the operation of all stop lights.


Posted on 31 July 2026 by ScegliAuto


Related tutorials

Replacing Bulbs on Audi A1
Replacing Bulbs on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) Are the rear light bulbs damaged? Do you want to replace the rear light? Remove the rear light and replace it. Open the boot and secure it; remove th…
Replacing the Headlamp Bulbs of the Audi A1
Replacing the Headlamp Bulbs of the Audi A1
Audi A1 (2018-2025 / MK 2, GB) If one of the headlamp bulbs of the Audi A1 burns out, you must replace it as soon as possible to drive safely and avoid penalties. To do this, open …
How to Replace the Rear Headlamp Bulb on the Audi A1
How to Replace the Rear Headlamp Bulb on the Audi A1
Audi A1 (2010-2018 / 8X, MK 1) This brief video tutorial explains how to independently replace the rear headlamp on the Audi A1. First, remove the three protective caps. Under the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos