Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Lights on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Interior dome light bulb

Do you want to remove the lights from the interior light unit? Here’s how to remove the light unit from inside the panel of an A3. Pry between the light unit and the roof covering panel, pull the light unit out of the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the same light unit into its housing or a new one (push the transparent plastic with your hands until the tabs lock into the side plastic). Test the correct operation of the light unit after replacing the bulbs/LEDs.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulbs on an Audi A3?
How to Replace the Interior Light Bulbs on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To replace the interior light bulbs on an Audi A3, use a lever tool to detach the central ceiling light and then remove the underlying plastic cover.…
Where are the fuses located in the Audi A3?
Where are the fuses located in the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) Each of the fuse boxes of the Audi A3 is responsible for containing the fuses that regulate the operation of the devices present in the car: the firs…
Replacing the Interior Lights of the Audi A3
Replacing the Interior Lights of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Follow the steps below to remove and replace the bulbs in the interior light of the Audi A3. First, get inside the vehicle and pry off the plastic li…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos