Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil change on Audi Q5 3.0

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Engine oil

It is recommended for this car model to use 0W-40 Advanced Synthetic Engine Oil. Raise the left front of the car with a jack. Positioning yourself under the car, unscrew the plastic cover that prevents you from reaching the engine oil compartment, with a torx t20 wrench. Place a large enough tray under the compartment itself and unscrew the bolt that acts as a plug to the drain hole with a torx wrench t40. Collect the used oil in the pan and tighten the hole with the bolt. Now go to work from the bonnet: unscrew the filler cap and insert the same amount of oil spilled with the new lubricant.

Posted on 4 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Transmission Oil Change on an Audi Q5
Transmission Oil Change on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Let's see how to change the transmission oil on an Audi Q5. Lift the car on a column lift to a comfortable height for disassembly. To change the oil,…
How to change the gearbox oil on the Audi Q5?
How to change the gearbox oil on the Audi Q5?
Audi Q5 (2017-2025 / 80A, MK 2) To be able to change the gearbox oil of the Audi Q5, you have to lift the car via a bridge or jack and place a container in correspondence with the o…
How to change the gear oil of an Audi
How to change the gear oil of an Audi
Audi Q5 (2008-2017 / MK 1, 8R) Before we can begin, we will have to go and raise our Audi, so that we can work underneath without hindrance. Let's start by removing the lower gear …

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos