Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear wiper blade on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Windshield wipers

Before we can begin, we will have to get out of our Audi A4 and head towards the tailgate. So let's start by raising the entire arm of the wiper, thus also raising the blade that we will have to replace. Once this is done, we will have to release the brush from the arm by pulling gently, and we will have finished the disassembly. To mount the new blade and then reposition the wiper arm, we will simply have to repeat this simple procedure in reverse, and we will have successfully completed the replacement of the rear wiper blade.

Posted on 9 January 2021 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the Audi A4 rear light bulbs
How to disassemble the Audi A4 rear light bulbs
Audi A4 (2004-2008 / B7) Does the rear light of the A4 have burnt out bulbs? Let's see how they replace each other. We lift the tailgate, let's put it in safety. We remove th…
How to replace the ignition lock of the Audi A4 key
How to replace the ignition lock of the Audi A4 key
Audi A4 (2007-2016 / B8) Let's see in this video how to disassemble and replace the ignition lock of the Audi A4 key. First we get on board the car and start by removing the …
How to replace the thermostat on an Audi A4
How to replace the thermostat on an Audi A4
Audi A4 (2004-2008 / B7) Before starting, we will have to open the front hood of our Audi A4. So let's start by disengaging and removing the upper engine cover, then disassem…

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos