Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Light Bulbs on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Tail light

Is the tail light on your A4 out? Here's how to replace the bulbs. Lift the trunk and secure it. Remove the fabric cover that hides the access to the bulbs. Once the cover is off, you can unscrew the screws for the tail light. Remove the tail light assembly. Install new bulbs in place of the damaged ones (always use the correct type and size). Replace all bulbs inside the tail light assembly. Reinstall and secure the tail light with the dedicated cover. Replace the bulbs in the other tail light if they are damaged.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlight Bulbs on the Audi A4
Replacing the Rear Headlight Bulbs on the Audi A4
Audi A4 (2007-2016 / B8) This guide will show you how to remove and replace the rear headlight bulbs on the Audi A4. First, open the trunk and start removing the side trim; t…
Replacing Rear Headlight Bulb
Replacing Rear Headlight Bulb
Audi A4 (2007-2016 / B8) To replace the rear headlight bulb, you need to remove the headlight itself: open the trunk, also open the side carpet cover, unscrew the plastic ret…
How to replace the rear light bulbs of the Audi A4.
How to replace the rear light bulbs of the Audi A4.
Audi A4 (2007-2016 / B8) Briefly, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Audi A4. First, let's open the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos