Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the Audi A4.

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light bulb

Briefly, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Audi A4. First, let's open the rear trunk lid and start removing the inner cover with the lining; we will unscrew the screws of the bulb holder to detach it from the ceiling light, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, we remove and replace any faulty bulbs with new ones of the correct type and with the same socket; we reassemble and connect the bulb holder, checking the operation of the brake lights.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace Rear Headlight Bulbs on Audi A4
Replace Rear Headlight Bulbs on Audi A4
Audi A4 (2007-2016 / B8) Remove the rear headlight to access the damaged bulbs on the Audi A4. Open the trunk, remove the plastic cover from the trunk (side). Unscrew the ret…
How to Remove the Tail Light Bulbs on an Audi A4
How to Remove the Tail Light Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Is the tail light on your A4 out? Here's how to replace the bulbs. Lift the trunk and secure it. Remove the fabric cover that hides the access to the…
Replace the Rear Headlight Bulbs on Audi A4
Replace the Rear Headlight Bulbs on Audi A4
Audi A4 (2007-2016 / B8) Do you need to replace the rear headlight bulbs on your car? Let's see in this video how to remove the rear headlight of an Audi A4 and how to replac…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos