Do it yourself
Frequently asked questions about cars and motorcycles

Replace Rear Headlight Bulbs on Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Remove the rear headlight to access the damaged bulbs on the Audi A4. Open the trunk, remove the plastic cover from the trunk (side). Unscrew the retaining screws, take out the rear headlight, and remove it from its housing.

Replace the damaged bulbs from inside the headlight (matching size and voltage). After replacing the damaged bulbs, install the headlight back onto the car body, screw in the screws, and secure the covers.

Once the rear headlight is installed, test the operation of the bulbs.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) This guide will show you how to remove and replace the rear headlight bulbs on the Audi A4. First, open the trunk and start removing the side trim; t…
Audi A4 (2007-2016 / B8) Do you need to replace the rear headlight bulbs on your car? Let's see in this video how to remove the rear headlight of an Audi A4 and how to replac…
Audi A4 (2000-2004 / B6) Remove the rear light to replace it or to change the damaged bulbs inside. Lift the trunk. Get a socket wrench, remove the screw cover cap on the sid…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos