Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Bulbs in the Headlights of an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to install LED bulbs in the headlights of an Audi A4, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Then, open the hood and remove the mounting bolts of the headlight using a Torx wrench. Next, disconnect the power connector, separate the headlight from the body, and remove the large circular cap. At this point, simply extract the old bulb by turning it slightly counterclockwise, insert the new bulb, and reassemble everything by following the reverse procedure.


Posted on 12 April 2026 by ScegliAuto


Related tutorials

Removing Headlights on A4
Removing Headlights on A4
Audi A4 (2007-2016 / B8) Removing the front headlights on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headligh…
How to replace the front headlight bulbs in the Audi A4?
How to replace the front headlight bulbs in the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial we can see how to replace the front headlight bulbs in the Audi A4, an extremely simple and quick operation. First of all, make sure…
Replacing Interior Lights with LED Lights
Replacing Interior Lights with LED Lights
Audi A4 (2007-2016 / B8) LED lights have undeniable advantages over incandescent bulbs, especially in terms of efficiency and light tone. There are many aftermarket kits avai…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos